Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13763576
- Product Categories
- Friendly Links
The maximum package size L600 × W560 × H350mm smallest package size of 250 × 60 × 60mm Power supply voltage 220-240V / 50-60Hz power 3KW Packing speed 2-5pcs / minute Sealing time / contraction time 0.5-1.5s (sealing and cutting time) Load 30kg film width / thickness Max 550mm (film width) machine size L1250 × W910 × H1860mm Weight 200kg Applicable shrink film PE, PP packaging edit as different packaging, shrink wrap packaging machines roughly divided into the following three forms: 1. two It is an open end of the tubular membrane or a flat membrane first packing material wrapped in a sleeve and then heat-shrunk in operation, after the wrapping is done at both ends of the package has a constriction. ⑴ When tubular film, the first film opening distraction cylinder, then with slide film products into the tube, and then cut the film. As shown in Figure 1. It's more suitable for wrapping cylindrical objects, such as batteries, rolls, cans and packaging. With tubular film packaging advantages are reduced by 1 to 2 Sealing process, appearance, the disadvantage is unable to meet the diverse requirements of the product, only suitable for mass production of a single product. ⑵ with flat-wrapping materials, useful for single and double flat film Ping film wrapping two ways. Film to be wider than the article, Zhang Ping with a double membrane, which spend the next two film wrapping, sealing the previous package complete cut, while two films was sealed up, and then the product with the machine or by hand to the upright film, seal cutting mechanism put in place after the whereabouts of the other side of the product sealing and cut, after the heat shrink film wrapping of products by both ends of the package shrink oval opening formed by a single flat film when the first flat membrane expansion, will be wrapping products sent to the middle against a flat membrane, forming a horseshoe-shaped wrap, then heat-sealed lap seal. ⒉ sealed on all sides will wrap around the product with a flat membrane or tubular membrane, sealed seams using lap. For applications requiring a sealed product packaging. ⑴ with folded membrane L-type sealing method can be used to fold film reel, the film pulled out a length in a horizontal position, with the open end of the mechanical or manual distraction, to push the product at the crease. ⑵ pillow bag packaging can be a single flat film. This method uses a single flat membrane, the first longitudinal seam sealing into a tubular shape, the products into which then cut into pillow transverse joint seal packaging or both ends of the punch ligation into a cartridge packaging. ⑶ Ping membrane surrounded by double sealed packs similar open at both ends, just the machine is equipped with sealing means on both sides to complete. ⑷ with tubular film wrapping, you can simply cut the tubular film simultaneously sealing, puncture, and then shrunk. Sealing is often beside the needle, the needle when heat-sealed to the film thrusts bleed hole, the hole in the heat-shrinkable often self-enclosed. ⒊ end of an open tray shrink packaging is a typical example, the first film made block bottom sacks, big bags and then cover the top down on the stack of goods tray, and then shrunk. The product will be installed trays on the conveyor belt, put shrink film bags; by the conveyor belt into the heat tunnel, through the heat tunnel after the completion of shrink packaging. Its main feature is a certain amount of product can be securely strapping together as a unit, not loose during transport and can be stacked in the open air.
- Company Profile
Economic nature of business: | |
Legal representative or person in charge: | |
Business Type: | |
Companies Registry: | |
Registered capital: | |
Founded: | |
Number of employees: | |
Monthly output: | |
Annual turnover: | |
Exports: | |
Management System Certification: | |
Principal place of business: | |
Major customers: | |
Factory Size: | |
Bank: | |
Bank account No.: | |
Whether to provide OEM and processing: | Not |
Main Market: | |
Main products or services: | Rockwool board packaging machine shrink film packaging machine packing machine strapping gold plate |
Admin>>>
You are the 3576 visitor
Copyright © GuangDong ICP No. 10089450, Yuejin preservative Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 3576 visitor
Copyright © GuangDong ICP No. 10089450, Yuejin preservative Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility